China 5 Ton Standard Enclosed Continual Overhead Conveyor Roller Chain Uh-5075-S roller chain assembly

Product Description

5 ton standard enclosed Continuous Overhead Conveyor Roller Chain UH-5075-S

 

5Ton common chain features

No.1 Forging technology

Every single chain buckle is precision forged by way of 10 processes, and the breaking pressure of the chain reaches 55KN.

No.2 Chain duration precision

Below the test force of 270N/m, the calculated deviation does not exceed +.3%~-.1% of the nominal size of the measured length.

No.3 Large hardness

The wheels are carburized and quenched, and the floor hardness reaches forty five degrees or a lot more.

No.3 Adaptable turning

The bare minimum horizontal turning radius of the chain can be R300mm*180 levels (turntable elbow), and the chain will pass via the elbow effortlessly without having jamming.

 

 

 

 

5Ton 5075 conveyor chain parameters

                           Model

five Ton

Regular Chain
GJ-5075-S

5 Tons Horizontal 

Wheel Chain
GJ-5075-HH

5 Tons Vertical

Wheel Chain
GJ-5075-HV

five Tons Further

Weighty Chain
GJ-5075-HA

Parameters
Chain pitch(mm) one hundred fifty a hundred and fifty 150 one hundred fifty
One level lifting(kg) 15 15 25 25

One point lifting excess weight KG (making use of

Y-type spreader or beam spreader)

35 35 50 fifty
Allowable chain pressure (KN) 30 30 30 thirty
Chain final tensile load KN fifty five 55 55 fifty five
Chain excess weight(kg/m) four.two four.six four.eighty five 5.3
Observe technical specs fifty seven*67*seventeen fifty seven*67*17 fifty seven*67*seventeen fifty seven*sixty seven*17
Minimal hanging length (mm) one hundred fifty a hundred and fifty 150 a hundred and fifty
Vertical roller diameter (mm) 52 fifty two fifty two 52
Horizental roller diameter (mm) 45 45 45 forty five
Shifting velocity (m/min) .5-15 .5-15 .5-15 .5-fifteen
Least radius of gyration(mm) R255 R255 R255 R255
Minimal vertical radius(mm) R500 R500 R500 R500
Doing work temperature(ºC) 250 250 250 250

 

Company check out

 

 

 

 

FAQ              
1. who are we?
We are primarily based in ZheJiang , China, start from 2000,market to Central The us(40.00%),Northern Europe(thirty.00%),Western Europe(twenty.00%),South The united states(ten.00%). There are overall about 201-three hundred folks in our business office.

2. how can we assure quality?
Often a pre-generation sample ahead of mass manufacturing
Usually final Inspection ahead of cargo

3.what can you buy from us?
mdf powder coating line, steel powder coating line,home appliances assembly line, electrostatic spray paining line, overhead line conveyor elements.

four. why ought to you purchase from us not from other suppliers?
we are a manufacturing unit for producing automated coating line, property appliance assembly line key in MDF powder coating line and metal powder coating and as effectively as spare components spraying for vehicle and 3 c 3c course plastic shell portray line, washing equipment assembly line, LED Tv set assembly line, Refrigerator freezer and CZPT dryer assembly line, air conditioner assembly line, and so forth.

5. what companies can we supply?
Recognized Shipping Phrases: FOB,EXW
Accepted Payment Forex:USD,HKD,CNY
Acknowledged Payment Type: T/T
Language Spoken:English,Chinese.

US $19-25
/ Meter
|
100 Meters

(Min. Order)

###

After-sales Service: on Line After Sale Service
Warranty: 1 Year
Structure: Chain Conveyor
Material: Stainless Steel
Material Feature: Heat Resistant, Fire Resistant
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant

###

Customization:

###

                           Model

5 Ton

Standard Chain
GJ-5075-S

5 Tons Horizontal 

Wheel Chain
GJ-5075-HH

5 Tons Vertical

Wheel Chain
GJ-5075-HV

5 Tons Extra

Heavy Chain
GJ-5075-HA

Parameters
Chain pitch(mm) 150 150 150 150
Single point lifting(kg) 15 15 25 25

Single point lifting weight KG (using

Y-type spreader or beam spreader)

35 35 50 50
Allowable chain tension (KN) 30 30 30 30
Chain ultimate tensile load KN 55 55 55 55
Chain weight(kg/m) 4.2 4.6 4.85 5.3
Track specifications 57*67*17 57*67*17 57*67*17 57*67*17
Minimum hanging distance (mm) 150 150 150 150
Vertical roller diameter (mm) 52 52 52 52
Horizental roller diameter (mm) 45 45 45 45
Moving speed (m/min) 0.5-15 0.5-15 0.5-15 0.5-15
Minimum radius of gyration(mm) R255 R255 R255 R255
Minimum vertical radius(mm) R500 R500 R500 R500
Working temperature(ºC) 250 250 250 250
US $19-25
/ Meter
|
100 Meters

(Min. Order)

###

After-sales Service: on Line After Sale Service
Warranty: 1 Year
Structure: Chain Conveyor
Material: Stainless Steel
Material Feature: Heat Resistant, Fire Resistant
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant

###

Customization:

###

                           Model

5 Ton

Standard Chain
GJ-5075-S

5 Tons Horizontal 

Wheel Chain
GJ-5075-HH

5 Tons Vertical

Wheel Chain
GJ-5075-HV

5 Tons Extra

Heavy Chain
GJ-5075-HA

Parameters
Chain pitch(mm) 150 150 150 150
Single point lifting(kg) 15 15 25 25

Single point lifting weight KG (using

Y-type spreader or beam spreader)

35 35 50 50
Allowable chain tension (KN) 30 30 30 30
Chain ultimate tensile load KN 55 55 55 55
Chain weight(kg/m) 4.2 4.6 4.85 5.3
Track specifications 57*67*17 57*67*17 57*67*17 57*67*17
Minimum hanging distance (mm) 150 150 150 150
Vertical roller diameter (mm) 52 52 52 52
Horizental roller diameter (mm) 45 45 45 45
Moving speed (m/min) 0.5-15 0.5-15 0.5-15 0.5-15
Minimum radius of gyration(mm) R255 R255 R255 R255
Minimum vertical radius(mm) R500 R500 R500 R500
Working temperature(ºC) 250 250 250 250

Tips for Buying Roller Chains

There are several things to consider when buying a new roller chain. Chains can be heavy-duty roller chains or self-lubricating chains. These factors all affect the wear of the roller chain. Proper lubrication and adjustment are important to prolong the life of the chain. Here are tips for buying a new roller chain. Some common types of roller chains are listed below. The type you choose depends on its purpose.

Bushingless Roller Chains

The tensile strength of a bushingless roller chain is often the primary measure of its durability. It represents the maximum load a chain can withstand before breaking, but fatigue strength is just as important. Factors that affect fatigue strength include the steel used to manufacture the chain, the quality of the pitch holes, the type of shot peening used, and the thickness and design of the chainplates. Here are some tips on how to test the fatigue strength of bushless roller chains.
The inner link plate 130 is thicker than the outer link plate 120. This feature helps the connecting pins and rollers remain stable. This feature reduces wear and noise. It also improves the overall durability of the chain. Unlike traditional chains, bushingless roller chains are easier to maintain than comparable chains. They also reduce the risk of sprocket wear. Bushingless roller chains are ideal for demanding applications where noise is a concern.
Unlined roller chains are generally less expensive than lined roller chains. Bushings are integrated into the inner plate, while those in conventional chains are inserted into the outer plate. The result is lower cost and more flexible lateral movement – a requirement for modern derailleur gearing. But with all these advantages, choosing a linerless chain is still essential. You should read reviews about the durability of bushingless roller chains before buying.
In its simplest form, the connecting pin 140 is pressed into the pinhole 126 in the direction of chain travel. Connecting pins 140 extend through these holes to connect the inner link plate and the rollers. The connecting pins can also be welded to the outer link plates. During assembly, chain C can be efficiently assembled from one side in the engine width direction. If you have an older car, you can try the bushless version and see how it goes.
Another variation of bushless roller chains involves sprockets and connecting pins. The outer link plate has connecting pins extending through holes in the inner link plate. The rollers are able to rotate on the connecting pins, thus lubricating them. There are two types of bushingless roller chains: connecting pin chains and sprocket chains. These two types of bushingless roller chains are generally interchangeable.
Linerless roller chains can contain chain guides. During the riveting process, the outer and inner link plates compress against each other, reducing friction and power loss. ANSI Standard B29.1-2011 is designed to make it easier for you to choose the right chain for your vehicle. This version is also quieter, reducing noise. In addition to improved efficiency, bushingless roller chains offer better durability. It is easier to install and less expensive to maintain.
chain

Single Strand Heavy Duty Roller Chain

Single Strand Heavy Duty Roller Chains, also known as Single Strand Heavy Duty Roller Chains, are available in a variety of sizes. These chains run on standard roller sprockets and have thicker side plates. These increase their tensile strength, fatigue rating and overall working life. Monostrand chains are available in three quality levels: riveted, open and closed.
If your chain needs to be replaced, your best bet is to buy replacement parts. Single strand roller chains are usually ten feet long. For larger sizes, consider purchasing a single-strand heavy-duty roller chain that is three times longer. This way, you don’t have to worry about damaging your machine. Oregon roller chains are manufactured to OEM standards.
CZPT Plus Heavy Duty Roller Chains feature solid rollers for light to medium duty applications. It meets ANSI B29.1 durability standards and is ideal for light to medium duty applications. CZPT Plus Heavy Duty Roller Chains have solid bushings in selected sizes to ANSI B29.1. CZPT Plus heavy duty roller chains are supplied with ample lubricant. If your application requires heavy duty roller chains, you can find them at CZPT Chain and Sprockets.
In addition to single-strand heavy-duty roller chains, there are three-strand heavy-duty roller chains. These chains can withstand enormous pressure and are ideal for applications in agriculture, sewage treatment, machinery, and more. They are designed to last for years without breaking. So whether you’re looking for a heavy duty roller chain for your farm equipment or construction, American Roller Chain has you covered.
In order to choose the right size for your needs, you must first determine the diameter and overall width of the roller chain. You also have to measure the width of the drum itself. This information will determine how many chains you need to order. The measurement and selection of dimensions will determine the cost of your new roller chain. Buying the right roller chain is simple and convenient if you understand all of these factors. So use a caliper and make sure the roller chain is measured correctly.
The size of a single strand heavy duty roller chain is critical to the stability of your business. You can save a lot of money by buying a high-quality roller chain. Just make sure to store it properly. Its shelf life is virtually unlimited. When properly stored, a single-strand heavy duty roller chain can improve the stability of your business for years to come. A single-strand chain is an affordable investment that will pay dividends for your business.
chain

Self-lubricating roller chain

Self-lubricating roller chains can be used in a variety of applications. This type of chain is an excellent choice for areas that cannot be manually lubricated. It also reduces the risk of contamination as no lubricant is required at all. Self-lubricating roller chains are available in a variety of designs and are compatible with a wide variety of food applications. If you’re interested in learning more about such chains, keep reading!
There are two main types of chains of this type: DIN ISO 606 and DIN 8187. They are similar in construction to traditional chains, but are more durable. They have higher friction and wear resistance than traditional roller chains. These chains are also very effective in applications that require a lot of moisture and water flushing. They require less maintenance and can last a long time. Another benefit of self-lubricating chains is that they last longer than regular roller chains, which can be quite expensive.
Another self-lubricating roller chain is the non-lubricating type. These chains are internally lubricated and isolated from the external environment. Ideal for low to high load applications, these chains will last 5 to 20 times longer than comparable initially lubricated roller chains. Self-lubricating roller chains have so many advantages, you’ll be glad you bought one.

China 5 Ton Standard Enclosed Continual Overhead Conveyor Roller Chain Uh-5075-S     roller chain assemblyChina 5 Ton Standard Enclosed Continual Overhead Conveyor Roller Chain Uh-5075-S     roller chain assembly
editor by czh 2023-01-30