China Best Sales Middle Side Guide Inverted Tooth Contact Silent Chain for 03c C4-120 C4-123 C4-129 C4-132 C4-138 C4-150 C4-320 C4-323

Product Description

Middle Side Xihu (West Lake) Dis. Inverted Tooth Contact Silent Chain for 03C C4-120 C4-123 C4-129 C4-132 C4-138 C4-150 C4-320 C4-323

Product Description

Toothed chain, also known as silent chain, is a form of transmission chain. China’s national standard is GB/T1571-2003 Toothed Chain and Sprocket. Toothed chain is composed of a series of toothed chain plates and guide plates alternately assembled and connected by pin or combined hinge elements, and the adjacent pitch is hinge joint. According to the guide type, it can be divided into external guided toothed chain, internal guided toothed chain and double internal guided toothed chain.

Middle guide Side guide

 

Chain No.

Chain

width

Pin length

Xihu (West Lake) Dis.

type

Number of

plates

Litimete tensile

strenght

Average

tensile

strenght

Weight

per meter

 

b max

Lc max

L max

 

n

Q min

Kn/lbf

Q0 

KN

q

kg/m

03C

10.2

16.7

15.2

inside

 

 

 

 

C4-120

19.5

26

24.5

13

20/4545

22.2

1.2

C4-123

22.5

29

27.5

15

23/5227

25.5

1.37

C4-129

28.5

35

33.5

19

28.5/6477

31.6

1.72

C4-132

31.5

38

36.5

21

31.5/7159

34.9

1.89

C4-138

37.5

44

42.5

25

38/8636

42.1

2.22

C4-150

49.5

56

54.5

33

50/11363

55.5

2.9

C4-320

19.5

26

24.5

outside

13

20/4545

22.2

1.21

C4-323

22.5

29

27.5

15

23/5227

25.5

1.38

C4-329

28.5

35

33.5

19

28.5/6477

31.6

1.73

C4-332

31.5

38

36.5

21

31.5/7159

34.9

1.9

C4-338

37.5

44

42.5

25

38/8636

42.1

2.23

Chain No

Pitch

Pin diameter

Dsitance from hole center to tooth

Plate depth

Plate thickness

 

P

d2 max

h1 max

h2 max

t/T

max

03C

4.76

1.62

1.9

4.9

0.6

C4-120

12.7

4.45

6.62

12.1

1.5

C4-123

C4-129

C4-132

C4-138

C4-150

C4-320

12.7

4.45

6.62

12.1

1.5

C4-329

C4-332

C4-338

Main features:

1. The noise small tooth chain transmits power through the meshing of the involute tooth profile of the working
chain plate and the sprocket teeth. Compared with the roller chain and sleeve chain, the polygonal effect is significantly
reduced, and the impact is small, the movement is stable, and the meshing noise is small.

 

2. The chain link of the tooth chainwith high reliability is a multi-piece structure. When a single chain link is damaged in the work, it will not affect the work of the whole chain, so that people can find and replace it in time. If it is necessary to increase the bearing capacity, it only needs to be smaller in the width direction (increase the number of chain link rows).

 

3. High kinematic accuracy The wear and elongation of each link of the toothed chain are uniform, which can maintain high kinematic accuracy. The so-called silent chain is a toothed chain, also known as a tank chain. It looks like a chain track. It is riveted by multiple steel plates. The better the meshing with the sprocket, the less noise when entering the teeth, the more resistant to stretching, and can effectively reduce the noise of the chain. Now more and more chain engines use this silent chain for timing chain and oil pump chain.

Main application scope of toothed chain: toothed chain is mainly used in textile machinery, centerless grinder and conveyor belt mechanical equipment.

 

 

Company Profile

The company has advanced manufacturing technology and relatively strong manufacturing force, and high-end precision testing instruments to ensure that every chain leaving the factory is qualified. The company mainly deals in: transmission chain, transmission chain, lifting chain, agricultural machinery chain, stainless steel chain, etc. Various non-standard chains are ordered separately. The company uses more than 600 kinds of non-standard molds. It can be customized according to drawings. We implement all-round management and control over product quality and service, and constantly improve customer satisfaction. The chain produced by the company enjoys a certain reputation in the world with its high quality, good reputation and high-quality service.

Related products

The chain types are divided into engineering chain, conveying chain, plate chain, transmission chain, escalator chain, parking equipment chain, agricultural chain, stainless steel chain, etc. There are different types of chains with different purposes, specifications, models and styles. 

Plate chain type Plate chain is usually used to lift goods. For example, forklift, lifting machinery and equipment. Plate chain has no rollers, but chain plates are connected with each other. It is a kind of chain used for loading. Different types of plate chains have different functions, Stainless steel chain Stainless steel chain types include standard stainless steel chain, stainless steel hollow pin chain, stainless steel chain used for environmental protection equipment, etc,
 
Type of transmission chain Many types of transmission chains are power transmission chains, such as precision roller chains, double pitch roller chains, high-strength short pitch precision roller chains, petroleum chains, pumping unit chains, self-lubricating roller chains, side bending (turning machine) chains, corrosion resistant chains, etc There are many types of escalator chains, including escalator step chains, heavy-duty high gradient escalator step chains, travelator chains, and escalator chains of different specifications and models,

 

The engineering chain includes many kinds of chains, such as cement bucket elevators, environmental protection equipment, pavers, trenchers, welding equipment, mining, power plant dust removal and other equipment.
 
Agricultural machinery chain Agricultural machinery chain is a chain developed and produced according to the characteristics of different crops, including rice harvester chain, GS38 combine chain, corn harvester chain, citrus straw harvester chain, soybean harvester chain, peanut harvesting chain, garlic sowing chain, and potato planter chain.
There are many types of conveying chains, such as wood conveying chain, double speed chain, RF conveying chain, sharp tooth chain, sugar chain, brown oil chain, F chain, metric conveying chain, top roller conveying chain, grain scraper, hollow pin, suspension conveying, etc. The conveying chain is a power chain for transporting goods. Parking equipment chain This type of chain includes roller chains for parking equipment, chains for vertical circulation parking equipment, and parking equipment chains that can be developed according to demand.
 

We not only produce chains and transmissions, including gear boxes, sprockets, gears, racks, couplings and other products, but also supply them to meet your one-stop purchase. Welcome to consult us

 

Packaging & Shipping

Certifications

 

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Stainless steel
Surface Treatment: Oil Blooming
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

toothen chain

Maintenance Requirements for a Toothed Chain and Prolonging Its Lifespan

Maintaining a toothed chain is essential to ensure its optimal performance and longevity. Here are the key maintenance requirements and steps to prolong the lifespan of a toothed chain:

  • Regular Lubrication: Proper lubrication is crucial to reduce friction and wear between the chain’s components. Follow the manufacturer’s recommendations for the type and frequency of lubrication. Use a suitable chain lubricant and apply it evenly along the chain’s length.
  • Tension Adjustment: Periodically check the chain’s tension and make adjustments as needed. A loose chain can lead to excessive wear and jumping off the sprockets, while an overly tight chain can increase the load on the chain and the entire system.
  • Inspect for Wear: Routinely inspect the chain for signs of wear, elongation, and damage. Look for elongation of the chain, damaged or worn teeth, and any visible defects. If significant wear is detected, consider replacing the chain to avoid potential failures.
  • Keep It Clean: Keep the chain and surrounding area clean from dirt, debris, and contaminants. A clean environment helps reduce wear and prevents foreign particles from entering the chain joints.
  • Address Misalignment: Ensure that the sprockets and chain are properly aligned. Misalignment can cause uneven wear and premature failure. Make necessary adjustments to achieve proper alignment.
  • Replace Damaged Parts: If any components of the toothed chain, such as the sprockets or connecting pins, show signs of damage or excessive wear, replace them promptly. Using damaged parts can lead to chain failure and potential damage to the machinery.
  • Avoid Overloading: Avoid subjecting the chain to loads beyond its rated capacity. Overloading can cause accelerated wear and may lead to chain failure. Consider using a chain with a higher load rating if needed.
  • Follow Operating Limits: Operate the machinery within the designated speed and temperature limits specified by the chain manufacturer. Exceeding these limits can compromise the chain’s performance and durability.
  • Proper Storage: If the chain is not in use, store it in a clean and dry environment to prevent corrosion and damage during storage.

Conclusion: Regular maintenance and proper care are essential to extend the lifespan of a toothed chain. Following the recommended maintenance practices, such as regular lubrication, tension adjustment, and inspection for wear, will help ensure the chain’s reliable performance and reduce the risk of unexpected failures. By addressing maintenance requirements promptly and avoiding misuse, you can significantly prolong the life of the toothed chain and optimize the performance of your machinery or equipment.

toothen chain

Are There Any Innovative Designs or Technologies That Improve the Efficiency of Toothed Chains?

Yes, there have been several innovative designs and technologies that aim to improve the efficiency of toothed chains. These advancements focus on enhancing performance, reducing wear, increasing load-carrying capacity, and improving overall reliability. Here are some notable innovations:

  • Inverted Tooth Chains: Inverted tooth chains are designed with the tooth profiles facing inward instead of outward. This design reduces impact and sliding friction between the chain links and the sprockets, leading to smoother and quieter operation. The reduced friction results in lower wear rates and improved efficiency.
  • Advanced Materials: The use of advanced materials, such as high-strength alloys, composite materials, or special coatings, can significantly enhance the strength and wear resistance of toothed chains. These materials also exhibit improved fatigue properties, allowing the chain to withstand higher loads and operate more efficiently over an extended service life.
  • Optimized Tooth Profiles: Innovations in tooth profile design focus on reducing friction, noise, and wear. Advanced tooth profiles, such as parabolic or modified involute profiles, ensure smoother engagement with the sprockets, leading to better power transmission efficiency and reduced energy losses.
  • Self-Lubricating Chains: Self-lubricating toothed chains incorporate lubricant-filled reservoirs or solid lubricants embedded in the chain material. This design provides a continuous and controlled supply of lubrication to the critical wear points, reducing friction and wear and improving overall efficiency.
  • Low-Friction Coatings: Applying low-friction coatings, such as PTFE or molybdenum disulfide, to the chain’s contact surfaces can reduce friction and wear. These coatings provide a smooth surface finish, minimizing the risk of metal-to-metal contact and improving the chain’s efficiency.
  • Preloading Techniques: Preloading techniques involve applying initial tension to the chain during installation. This method reduces initial elongation and helps maintain optimal tension throughout the chain’s service life, enhancing efficiency and reducing the need for frequent adjustments.
  • Smart Monitoring Systems: Advancements in sensor technology and data analytics have led to the development of smart monitoring systems for toothed chains. These systems can monitor chain condition, tension, and wear in real-time, allowing for predictive maintenance and optimizing chain performance.

Conclusion: The efficiency of toothed chains has significantly improved through various innovative designs and technologies. Inverted tooth chains, advanced materials, optimized tooth profiles, self-lubricating features, low-friction coatings, preloading techniques, and smart monitoring systems all contribute to increased efficiency, reduced wear, and improved overall performance. Manufacturers and users can benefit from these advancements to select the most suitable toothed chain for their specific applications and ensure optimal efficiency and reliability in power transmission and material handling systems.

toothen chain

How does a toothed chain differ from other types of chains, such as roller chains or conveyor chains?\

\

A toothed chain, also known as a timing chain or synchronous chain, differs from other types of chains like roller chains and conveyor chains in its design, purpose, and applications:

\

\Toothed Chain (Timing Chain):\

\

    \

  • Design: A toothed chain has tooth-like profiles on its inner surface, which mesh with corresponding sprockets.\
  • \

  • Purpose: The primary purpose of a toothed chain is to provide precise timing and motion control in mechanical systems. It ensures accurate synchronization between the driving and driven components.\
  • \

  • Applications: Toothed chains are commonly used in automotive engines to synchronize the camshaft and crankshaft. They also find applications in various industries that require precise motion control and synchronization, such as industrial automation, printing, and packaging.\
  • \

\

\Roller Chain:\

\

    \

  • Design: A roller chain consists of cylindrical rollers that engage with the teeth of sprockets, enabling smooth and efficient power transmission.\
  • \

  • Purpose: Roller chains are primarily used for power transmission in a wide range of applications, including bicycles, motorcycles, conveyors, and industrial machinery.\
  • \

  • Applications: Roller chains are found in many industries for transmitting power from one shaft to another. They are commonly used in conveyor systems, manufacturing equipment, and agricultural machinery.\
  • \

\

\Conveyor Chain:\

\

    \

  • Design: Conveyor chains are designed to have special attachments or links that allow them to carry and transport materials along a conveyor system.\
  • \

  • Purpose: The main purpose of conveyor chains is to move materials from one location to another within a conveyor system. They are suitable for horizontal, inclined, or vertical conveying applications.\
  • \

  • Applications: Conveyor chains are extensively used in industries such as mining, packaging, food processing, and automotive manufacturing, where continuous material handling is required.\
  • \

\

In summary, toothed chains are distinct from roller chains and conveyor chains in terms of their design and primary functions. Toothed chains provide precise timing and synchronization, roller chains are focused on power transmission, and conveyor chains are specialized for material handling in conveyor systems.\

China Best Sales Middle Side Guide Inverted Tooth Contact Silent Chain for 03c C4-120 C4-123 C4-129 C4-132 C4-138 C4-150 C4-320 C4-323  China Best Sales Middle Side Guide Inverted Tooth Contact Silent Chain for 03c C4-120 C4-123 C4-129 C4-132 C4-138 C4-150 C4-320 C4-323
editor by CX 2023-07-31