China Hot selling Conveyor Transmission Industrial Machinery Teeth Chain

Product Description

Tooth chain, also known as silent chain, belongs to a form of transmission chain. Tooth chain is an important mechanical basic component widely used. It is mainly used in high speed, heavy load, low noise and large center distance. Its transmission performance is better than that of tooth belt drive, gear drive and claw chain drive. It has become 1 of the preferred pair transmission forms in many industries. In meshing form, it can be divided into internal meshing tooth chain. External meshing tooth chain and internal and external compound meshing tooth chain, in which the internal and external compound meshing tooth chain has the least noise and the most extensive application.

application area
Tooth chain is an important mechanical foundation widely used. Especially at high speed, heavy load, low noise and large center distance, its transmission performance is better than that of tooth belt transmission, gear transmission and roller chain transmission. It has become 1 of the preferred transmission forms in many industries. In recent years, automotive engines (timing drive, oil pump, common rail pump, high-pressure pump, balance shaft, etc.), transmission, transmission box, motorcycle, forklift, steam turbine, aircraft, ship, rolling machinery, machine tools, industrial pumps, and other high-speed transmission, have been more and more widely used in various forms of tooth chains. With the continuous development of high-speed chain transmission technology, a new series of high-speed gear chain products with different structural forms and meshing mechanisms adapted to the “personalized” needs of the mainframe have been introduced in developed countries and entered the domestic market.

Characteristics of toothed chain
Because the tooth chain itself has some characteristics. In recent years, the engine of automobile, motorcycle and forklift has been more and more widely used. Its several prominent features are:
(1) the noise is very small. Tooth chain is meshed by involute tooth profile of working chain plate and sprocket teeth. Therefore, the meshing noise is smaller than that of roller chain and sleeve chain.
(2) High reliability. This is because the chain segment of the tooth chain is a multi-chip structure. When individual chains are destroyed in the work, the whole chain is not immediately disconnected, which enables people to find and replace in time. At the same time. Compared with the sleeve chain and roller chain with the same pitch, the gear chain drive is more compact. To increase the load-carrying capacity, the gear chain drive only needs to increase the smaller size in the width direction, while the sleeve chain drive needs to increase the pitch of the chain or adopt multi-row chains.
(3) The motion accuracy is high. This is because in the straight plate roller chain, because of the wear and tear of the hinge, the actual pitch of the inner and outer joints is gradually different, and the pitch of the outer joints becomes larger and larger, which reduces the transmission accuracy. The elongation of each link of the tooth chain is uniform due to wear, so it keeps a high motion accuracy.

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car
Surface Treatment: Baking Paint, Polishing
Structure: Tooth Chain, Leaf Chain
Material: 40mn, 45mn, Alloy
Type: Variable Speed Chain, Cranked Link Chain, Short Pitch Chain
Samples:
US$ 10/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

toothen chain

Can Toothed Chains be Used in High-Speed Applications, and Limitations to Their Speed

Yes, toothed chains can be used in high-speed applications, but there are certain limitations to consider. Toothed chains are commonly employed in various industrial machinery and equipment where reliable power transmission is required at high speeds. However, their suitability for high-speed applications depends on several factors:

  • Chain Type: Different types of toothed chains have varying speed capabilities. For example, roller chains are commonly used in high-speed applications due to their smooth operation, while silent chains or inverted tooth chains may have limitations at higher speeds.
  • Design and Quality: The design and manufacturing quality of the toothed chain play a crucial role in its ability to handle high speeds. Precision manufacturing and quality materials are essential to reduce vibration, noise, and wear at high speeds.
  • Lubrication: Proper lubrication is vital for reducing friction and wear in toothed chains operating at high speeds. Insufficient or improper lubrication can lead to accelerated wear and potential failure.
  • Tension and Alignment: Maintaining proper tension and alignment of the chain is critical at high speeds. Inadequate tension or misalignment can cause the chain to jump or derail from the sprockets.
  • Temperature: High-speed operations can generate significant heat due to friction. Ensure that the operating temperature remains within the chain’s specified limits to prevent premature wear or failure.

Limitations to Their Speed:

  • Dynamic Loading: At high speeds, the dynamic loading on the toothed chain increases significantly. This can lead to higher stress levels on the chain’s components, potentially causing fatigue and reducing the chain’s life.
  • Vibration and Noise: Toothed chains operating at high speeds can generate increased vibration and noise. Excessive vibration can be detrimental to the chain’s performance and may affect the surrounding machinery.
  • Centrifugal Force: At high speeds, centrifugal force can impact the chain’s behavior, causing it to stretch and potentially come off the sprockets if not adequately tensioned.
  • Wear and Fatigue: High-speed applications can accelerate wear and fatigue in the chain, necessitating more frequent inspections and maintenance.

Conclusion: Toothed chains can be used in high-speed applications, but their performance is subject to various factors and limitations. To ensure safe and reliable operation at high speeds, it’s essential to select the appropriate chain type, maintain proper tension and alignment, use quality materials, and provide adequate lubrication. Regular inspections, monitoring, and preventive maintenance are vital to address wear and mitigate the effects of high-speed operation on toothed chains.

toothen chain

Are There Any Innovative Designs or Technologies That Improve the Efficiency of Toothed Chains?

Yes, there have been several innovative designs and technologies that aim to improve the efficiency of toothed chains. These advancements focus on enhancing performance, reducing wear, increasing load-carrying capacity, and improving overall reliability. Here are some notable innovations:

  • Inverted Tooth Chains: Inverted tooth chains are designed with the tooth profiles facing inward instead of outward. This design reduces impact and sliding friction between the chain links and the sprockets, leading to smoother and quieter operation. The reduced friction results in lower wear rates and improved efficiency.
  • Advanced Materials: The use of advanced materials, such as high-strength alloys, composite materials, or special coatings, can significantly enhance the strength and wear resistance of toothed chains. These materials also exhibit improved fatigue properties, allowing the chain to withstand higher loads and operate more efficiently over an extended service life.
  • Optimized Tooth Profiles: Innovations in tooth profile design focus on reducing friction, noise, and wear. Advanced tooth profiles, such as parabolic or modified involute profiles, ensure smoother engagement with the sprockets, leading to better power transmission efficiency and reduced energy losses.
  • Self-Lubricating Chains: Self-lubricating toothed chains incorporate lubricant-filled reservoirs or solid lubricants embedded in the chain material. This design provides a continuous and controlled supply of lubrication to the critical wear points, reducing friction and wear and improving overall efficiency.
  • Low-Friction Coatings: Applying low-friction coatings, such as PTFE or molybdenum disulfide, to the chain’s contact surfaces can reduce friction and wear. These coatings provide a smooth surface finish, minimizing the risk of metal-to-metal contact and improving the chain’s efficiency.
  • Preloading Techniques: Preloading techniques involve applying initial tension to the chain during installation. This method reduces initial elongation and helps maintain optimal tension throughout the chain’s service life, enhancing efficiency and reducing the need for frequent adjustments.
  • Smart Monitoring Systems: Advancements in sensor technology and data analytics have led to the development of smart monitoring systems for toothed chains. These systems can monitor chain condition, tension, and wear in real-time, allowing for predictive maintenance and optimizing chain performance.

Conclusion: The efficiency of toothed chains has significantly improved through various innovative designs and technologies. Inverted tooth chains, advanced materials, optimized tooth profiles, self-lubricating features, low-friction coatings, preloading techniques, and smart monitoring systems all contribute to increased efficiency, reduced wear, and improved overall performance. Manufacturers and users can benefit from these advancements to select the most suitable toothed chain for their specific applications and ensure optimal efficiency and reliability in power transmission and material handling systems.

toothen chain

How does a toothed chain differ from other types of chains, such as roller chains or conveyor chains?\

\

A toothed chain, also known as a timing chain or synchronous chain, differs from other types of chains like roller chains and conveyor chains in its design, purpose, and applications:

\

\Toothed Chain (Timing Chain):\

\

    \

  • Design: A toothed chain has tooth-like profiles on its inner surface, which mesh with corresponding sprockets.\
  • \

  • Purpose: The primary purpose of a toothed chain is to provide precise timing and motion control in mechanical systems. It ensures accurate synchronization between the driving and driven components.\
  • \

  • Applications: Toothed chains are commonly used in automotive engines to synchronize the camshaft and crankshaft. They also find applications in various industries that require precise motion control and synchronization, such as industrial automation, printing, and packaging.\
  • \

\

\Roller Chain:\

\

    \

  • Design: A roller chain consists of cylindrical rollers that engage with the teeth of sprockets, enabling smooth and efficient power transmission.\
  • \

  • Purpose: Roller chains are primarily used for power transmission in a wide range of applications, including bicycles, motorcycles, conveyors, and industrial machinery.\
  • \

  • Applications: Roller chains are found in many industries for transmitting power from one shaft to another. They are commonly used in conveyor systems, manufacturing equipment, and agricultural machinery.\
  • \

\

\Conveyor Chain:\

\

    \

  • Design: Conveyor chains are designed to have special attachments or links that allow them to carry and transport materials along a conveyor system.\
  • \

  • Purpose: The main purpose of conveyor chains is to move materials from one location to another within a conveyor system. They are suitable for horizontal, inclined, or vertical conveying applications.\
  • \

  • Applications: Conveyor chains are extensively used in industries such as mining, packaging, food processing, and automotive manufacturing, where continuous material handling is required.\
  • \

\

In summary, toothed chains are distinct from roller chains and conveyor chains in terms of their design and primary functions. Toothed chains provide precise timing and synchronization, roller chains are focused on power transmission, and conveyor chains are specialized for material handling in conveyor systems.\

China Hot selling Conveyor Transmission Industrial Machinery Teeth Chain  China Hot selling Conveyor Transmission Industrial Machinery Teeth Chain
editor by CX 2023-11-29